Re: problem with jadetex and pdftex

[Sebastian Rahtz <s.rahtz@xxxxxxxxxxxxxx>]

Gerhard Stenzel writes:
 > try to include a graphic element  of the following form:
 >  <graphic entityref="single" scale=25 align=center></graphic>
 > If this is present, pdftex complains about a font ectt1000. The log file is
 > attached. The same file works without problems,

...

 > This is PDFTeX, Version 0.11 (based on TeX Version 3.14159) (MiKTeX 1.10b)
 > (preloaded format=jadetexpdf 98.7.11)  14 JUL 1998 20:29
 > **&jadetexpdf test.tex

If you send me test.tex, and the graphic, I'll try to diagnose
further. But if you are going to use pdfTeX, you need the later
versions, which will at least not fall over on that ectt1000 (thought
thats a side issue).

In general, please remember that pdfTeX is in an evolving state at
present. Be prepared to have to spend some time updating your setup
every few months while it settles down. 

Please, also, if you are interested in using JadeTeX, please consider
patching Jade and installing the current JadeTeX (from
http://www.tug.org/applications/jadetex). The Jade patches are
unblessed at present, but this is the version which I work on and
solve problems in.

Sebastian Rahtz


 DSSSList info and archive:  http://www.mulberrytech.com/dsssl/dssslist