Re: Comments and questions to follow

Subject: Re: Comments and questions to follow
From: James Clark <jjc@xxxxxxxxxx>
Date: Thu, 10 Sep 1998 15:55:34 +0700
There's an xsl-editors@xxxxxx list mentioned in the WD that you can use
for comments to the editors.  I would recommend sending editorial
comments to that list only.

G. Ken Holman wrote:
> 
> I finally found some time to put down some thoughts that came to mind when
> I read the specification for the first time.
> 
> Since I'm not a member of the WG, I believe this list is the only place for
> me to give feedback; apologies to the many members of this list who are not
> working on the editing of the document ... you can ignore these posts.
> 
> If the editors could give permission to contact them directly about
> comments of this kind, I won't bother the rest of the list members (or is
> posting here what we are expected to do?).
> 
> At 98/09/01 11:59 -0400, XSL-List Owner wrote:
> >MESSAGE SUBJECT PREFIXES
> >========================
> >
> >Since there is a lot of discussion of the new XSL Working Draft on the
> >XSL-List, please use this system of prefixes in the subject lines of
> >messages as a shorthand to indicate which part of the WD you are
> >discussing.  The prefix and the "real" subject of your message should
> >be separated by " : " as in the following examples.
> >
> >Please use these prefixes wherever possible: it will make life easier
> >for your fellow subscribers, and it will also make life easier for
> >people searching the archive.
> >
> >
> >SECTION NUMBERS - Use the section number enclosed in square brackets:
> >
> >   Subject: [3.16.7] : Are crayon drawings supported?
> 
> I've used the pattern above which has resulted in a number of posts rather
> than only one.
> 
> Thanks for your responses to the posts!
> 
> ......... Ken
> 
> --
> G. Ken Holman               mailto:gkholman@xxxxxxxxxxxxxx
> Crane Softwrights Ltd.  http://www.CraneSoftwrights.com/s/
> Box 266,                                V: +1(613)489-0999
> Kars, Ontario CANADA K0A-2E0            F: +1(613)489-0995
> Training:   http://www.CraneSoftwrights.com/s/schedule.htm
> Resources: http://www.CraneSoftwrights.com/s/resources.htm
> Shareware: http://www.CraneSoftwrights.com/s/shareware.htm
> 
>  XSL-List info and archive:  http://www.mulberrytech.com/xsl/xsl-list



 XSL-List info and archive:  http://www.mulberrytech.com/xsl/xsl-list


Current Thread