Eckhard, does this break compatibility with any 2600 carts like the NTSC
version did on some 7800's? I believe 2600 Dark Chambers was the problem cart
in the NTSC version.
Mitch
Msorman@xxxxxxx
http://atari7800.atari.org
Eckhard_Stolberg@xxxxxx writes:
> The modification is actually the same, only the parts on the
> board have been reordered. If you open up your PAL 7800, you'll
> see four smaller logic chips in the upper right, ordered in a
> square. The one in the top-right should be a 4013 BCP. Above it
> there is a row of components. The left-most part in that row
> is a colour-coded capacitor. It looks like a light-green
> resistor with brown/black/brown/gold rings. This is the part
> you need to remove for the compatibility fix. When you have
> removed the capacitor, it should read C42 under it on the
> board.
>
> I have done this fix to one of my 7800s, and it works with my
> Cuttle Cart now. But should you decide to do this modification
> yourself, you'll be doing it at your own risk.
>
>
> Ciao, Eckhard Stolberg
-
Archives (includes files) at http://www.biglist.com/lists/stella/archives/
Unsub & more at http://www.biglist.com/lists/stella/
