Re: [stella] Interlacing Success!

Subject: Re: [stella] Interlacing Success!
From: "Clay Halliwell" <clay.h@xxxxxxxxxxxxxxxx>
Date: Sat, 17 Aug 2002 23:35:55 -0500
----- Original Message -----
From: "Glenn Saunders" <cybpunks2@xxxxxxxxxxxxx>
To: <stella@xxxxxxxxxxx>
Sent: Saturday, August 17, 2002 7:12 PM
Subject: Re: [stella] Interlacing Success!


> the red shows over black or the green shows over black.  TWICE AS THIN as
> This should appear as 30hz flicker on the red isolated, TWICE AS THIN as
> This should appear as 30hz flicker on the green isolated, TWICE AS THIN as
> the usual 2600 scanline.

Ummm. The usual 2600 scanline is equal to exactly one NTSC scanline. There's
no way you're going to cut that height in half without rewiring the TV.

The test of interlaced output would be if a single scanline was TWICE AS
THICK -- indicating that the 2600 was forcing output into both fields (as
opposed to the same field, as per normal operation).

Clay

----------------------------------------------------------------------------------------------
Archives (includes files) at http://www.biglist.com/lists/stella/archives/
Unsub & more at http://www.biglist.com/lists/stella/


Current Thread