[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index] [Thread Index]
[Monthly Archives] [List Home]

AW: [Virtools] Physics Car and Constraint

Hi!

Finally I found the solution with the wings!
I wondered how to figure out the collision group of the "Physics Car".

The object name itself is the collision group of the Car.

The wings must have the same collision group and everything works without
any mistake.

Greetings, Matthias

-----Ursprüngliche Nachricht-----
Von: owner-virtools-user-group@lists.theswapmeet.com
[mailto:owner-virtools-user-group@lists.theswapmeet.com]Im Auftrag von
David Callele
Gesendet: Freitag, 25. Januar 2002 18:38
An: matthias.liebl@raysono.com; Virtools Theswapmeet
Betreff: Re: [Virtools] Physics Car and Constraint


Hi,

Again, not sure if this will work but if you remove the car from the physics
environment before you add the wings then add the wings and add both back to
the environment then, perhaps, the engine will recalculate the surfaces for
you so that you won't have this issue...

Just guessing here,

David Callele

----- Original Message -----
From: "Matthias Liebl" <matthias.liebl@raysono.com>
To: "Virtools Theswapmeet" <virtools-user-group@lists.theswapmeet.com>
Sent: Friday, January 25, 2002 2:52 AM
Subject: [Virtools] Physics Car and Constraint


> Hello Everybody!
>
> I am so sorry, but I have another problem with the Physics Engine.
>
> We have created a vehicle with the BB 'Physics Car' and besides four
wheels.
> So far so good. The car is moving with the three arrays and steared with
six
> keys by 'Switch on key'.
>
> But the vehicle has got two wings (childs of the car), which can be
extended
> to both sides of the car. After the extension the wings have to be
> physicallized to stabilize the car swimming on the water. The wings are
> fixed by a constraint to the car, so they don't fall off and turn back to
> the default position.
>
> At the physicallization the car does not move any more on the street
> directing to the water, just backward and farward a little bit and then
> stopping if you want to accelerate. The behavior in the water is quite ok.
>
> Thanx a lot for help,
>
> Yours Matthias
>
> -----------------------------------------------
> Matthias Liebl [Team Bremen]
> Ray Sono AG (Bremen) [company]
> Matthias.liebl@raysono.com [E-Mail]
> Otto-Lilienthal-Str.8, 28199 HB [Snail Mail]
> +49 (0)421 59647-37 [Phone]
> +49 (0)421 59647-77 [Fax]
> www.raysono.com [Meet Ray]
>
> ...............................................................
> Distributed via the virtools-user-group list:
http://www.theswapmeet.com/numl.html
> To reply to the list instead of its author, use "Reply to All"
> To unsubscribe: send "unsubscribe virtools-user-group" to
Majordomo@lists.theswapmeet.com
> To subscribe: send "subscribe virtools-user-group" to
Majordomo@lists.theswapmeet.com
> To post a message: send it to virtools-user-group@lists.theswapmeet.com
> ...............................................................
>

...............................................................
Distributed via the virtools-user-group list:
http://www.theswapmeet.com/numl.html
To reply to the list instead of its author, use "Reply to All"
To unsubscribe: send "unsubscribe virtools-user-group" to
Majordomo@lists.theswapmeet.com
To subscribe: send "subscribe virtools-user-group" to
Majordomo@lists.theswapmeet.com
To post a message: send it to virtools-user-group@lists.theswapmeet.com
...............................................................

...............................................................
Distributed via the virtools-user-group list: http://www.theswapmeet.com/numl.html
To reply to the list instead of its author, use "Reply to All"
To unsubscribe: send "unsubscribe virtools-user-group" to Majordomo@lists.theswapmeet.com
To subscribe: send "subscribe virtools-user-group" to Majordomo@lists.theswapmeet.com
To post a message: send it to virtools-user-group@lists.theswapmeet.com
...............................................................