[xsl] XSL-List Guidelines

Subject: [xsl] XSL-List Guidelines
From: Mulberry Technologies List Owner <xsl-list-owner@xxxxxxxxxxxxxxxxxxxxxx>
Date: Wed, 1 Jun 2005 11:36:00 -0400
This information is posted to the XSL-List (and the XSL-List Digest)
at intervals under the subject line "XSL-List guidelines".

INTRODUCTION TO XSL-LIST

XSL-List hosts discussion of XSL itself, XSL applications and implementation, and XSL user questions. XSL-List is open to everyone, users and developers, experts and novices alike. There is no restriction to what may be posted on the XSL-List provided it is related to XSL, which is considered to include XSLT (versions 1 and 2), XPath (versions 1 and 2) and XSL Formatting Objects (FO).

XSL-List is not a W3C mailing list, and has no affiliation with W3C (or any official standing with any standards organization). However, XSL-List was established with the encouragement of members of the W3C XSL Working Group, and members of the Working Group are among the subscribers to the list.

Only subscribers can post to XSL-List, but since the goal is to increase the level of XSL knowledge, XSL-List is being archived for everybody to view. The topics being discussed on the XSL-List change as new ideas arise or existing problems are dealt with, but the archive contains all of the ideas and solutions that have been discussed on the list.

XSL-List is provided by Mulberry Technologies, Inc., as a service to the XSL user community and the XSL standardization effort.


SUBSCRIBING TO THE XSL-LIST

To subscribe to the list, fill out the form at http://www.mulberrytech.com/xsl/xsl-list/subscribe-unsubscribe.html.


DAILY DIGEST

Daily digests -- copies of a whole days XSL-List messages sent as one email message -- are available. Not only is it a single email message containing all of that day's XSL-List messages, it is also half the size, on average, of the individual messages since it doesn't include the overhead of the mail headers from each message.

To unsubscribe from the list and subscribe to the digest, use the form at http://www.mulberrytech.com/xsl/xsl-list/subscribe-unsubscribe.html.


POSTING GUIDELINES

Only subscribers can post to XSL-List, and only from the exact address they used when they subscribed.

There is no restriction on what may be posted to the XSL-List provided it is related to XSL. Items concerning XML but without a direct connection to XSL should be posted to a XML-related list instead of to the XSL-List. Items related to DSSSL should be posted to the DSSSList.

Do not begin your subject line with "help" or "subscribe" since the list software will bounce the message because it looks like is an administrative request.

It is best to start a new message for a new thread. Do not start a new thread by replying to an unrelated message and just changing the subject line, since the header of your message will contain references to the previous message and your new message will appear in the archive as one of the replies to the original message.

Both subscribers to the full list (xsl-list@xxxxxxxxxxxxxxxxxxxxxx) and subscribers to the digest (xsl-list-digest@xxxxxxxxxxxxxxxxxxxxxx) should post their messages to xsl- list@xxxxxxxxxxxxxxxxxxxxxx; the messages will be received by both subscribers to the list and subscribers to the digest.


BEFORE YOU POST ... DO YOUR HOMEWORK
 - Check that your question isn't already answered in the XSL FAQ at http://www.dpawson.co.uk/.
 - Check that your question isn't already answered in the XSL-List archives at http://www.biglist.com/lists/xsl-list/archives/.
 - If you are asking for help with XSL code, determine which version of the language you are using (plus extensions, if any), and confirm that your XSL processor supports that version and/or extension. (If you are unsure of your processor, this can be determined by using the stylesheet at http://www.mulberrytech.com/xsl/xsl-list/processor-version.xsl on any input, including the stylesheet itself: see http://www.mulberrytech.com/xsl/xsl-list/processor-version.html for more information.) An XSLT 1.0 engine will not process stylesheets written in XSLT 2.0!


IN YOUR POSTING ...

Name the XSL processor, processor version, and version of the language you are using. This information is frequently necessary to diagnose a problem exactly, and always helps respondents give good advice.

If you are replying to a post, trim the quoted message to just the parts to which you are replying.

In addition to following simple rules of net etiquette and common sense, you will improve the chances that you will receive prompt and helpful responses by:
 - Asking questions specific enough that answers are possible. Describe what you are trying to do, how you approached it, what happened, and why you don't like the result you got. Don't simply say "it gave me an error": paste in the error message (someone else can probably make sense of it).
  -  Illustrating your question with a demonstration of the problem. Well-composed questions frequently include a small XML sample, an XSLT stylesheet, the results received, and the result that was desired - all in miniature, to make it comprehensible to readers new to your problem. (It is also not uncommon to discover what a problem actually is in the process of reducing it to an illustrative version.)


USE INFORMATIVE SUBJECT LINES

When posting to the XSL-List, do not use uninformative subject lines like "Urgent", "Question", or "Newbie HELP!!!", which don't say anything about what your problem is. Instead, use a meaningful subject line that will make sense to the people whose help you are trying to get. It may even get a response from people who normally shy away from "beginner" questions.

Informative subject lines make the XSL-List archive more useful since people with the same problem will more easily find the relevant threads.


DO NOT CROSS-POST

Cross-posting to the XSL-List and to another list, even XML-Dev or the DSSSList, is generally counter-productive. No list's archive will contain the complete thread; cross-posts from non-subscribers continuing the thread will bounce; and XSL-List subscribers who are not also on the other list will only see half the thread, as will those on the other list who are not also reading XSL-List. Subscribers to both lists may see two copies of the message, annoying them as well.


REPLIES GO TO THE LIST

The reply address of XSL-List messages (and of digests) is xsl-list@xxxxxxxxxxxxxxxxxxxxxx so REPLIES GO TO THE LIST BY DEFAULT. If you want to reply to just the author of a post, you should change the "To:" field in your reply.


USE SHORT QUOTES OF PREVIOUS MESSAGES IN REPLIES

Please do not quote entire messages just to add a few lines at the beginning or end. Instead, quote the parts to which you are directly replying or quote enough to establish the context.

Everybody on the list has already received the message that you are quoting, and anyone searching the archive will find your message and the previous message listed under the same thread.

Subscribers to the XSL-List will just ignore most of the quoted messages and move to the next post, but subscribers to the XSL-List Digest will mostly have to page past the quoted messages to reach the next material in which they are interested in reading.


ATTACHMENTS ARE BANNED

Since Mulberry's mailing lists have in the past been unwittingly used for spreading viruses in e-mail attachments, all e-mail attachments are banned from the XSL-List.

XSL stylesheets are XML files, and XML files are text files, so this does not affect the majority of posts to the list since you can include the files' text in the body of your message. If you need to refer to a binary file such as a PDF file, you should put the file on a Web site or FTP site and include the file's URL in your XSL-List post.

If you do include an attachment in your XSL-List post -- even a HTML attachment -- your message will bounce.


XSL-List ARCHIVE IS NOT EDITED

Because it is a public resource created by and for the entire XSL community, we do not edit XSL-List. Therefore, it is responsibility of list subscribers not to post anything to the list that they do not want publicly available, possibly for a very long time.


UNSUBSCRIBING FROM THE XSL-LIST

To unsubscribe from XSL-List, use the form at http://www.mulberrytech.com/xsl/xsl-list/subscribe-unsubscribe.html.


UNSUBSCRIBING FROM THE XSL-LIST DIGEST

To unsubscribe from the XSL-List digest, use the form at http://www.mulberrytech.com/xsl/xsl-list/subscribe-unsubscribe.html.


IF YOU STOP GETTING XSL-LIST MESSAGES

If you stop receiving XSL-List message, you may have been removed because mail to you was bouncing. You are not being picked on, and you can just rejoin the list.


ARCHIVE

XSL-List messages are archived at http://www.biglist.com/lists/xsl-list/archives/.


REPORTING BUGS IN SOFTWARE

Bugs in software should firstly be reported to its author rather than to the XSL List. Questions regarding how to work around bugs are welcome, but the list does not function as a bug-tracking system for any software.


XSL FAQ AND OTHER INFORMATION ON XSL

Dave Pawson's XSL FAQ is at http://www.dpawson.co.uk/.

The W3C information on XSL is at http://www.w3.org/Style/XSL.

An excellent source of information about XSL is the XSL page of Robin Cover's SGML/XML Web Page at http://www.oasis-open.org/cover/xsl.html.

Mulberry's XSLT and XPath Quick Reference is at http://www.mulberrytech.com/quickref/.


DSSSLIST -- THE DSSSL USERS' MAILING LIST

Mulberry Technologies, Inc., also provides the DSSSList -- the DSSSL Users' Mailing List. For subscription information and the DSSSList archive, see http://www.mulberrytech.com/dsssl/dssslist.


CONTACT

If you have any questions or problems, please contact xsl-list- owner@xxxxxxxxxxxxxxxxxxxxxxx


CHANGE History

==============
March 2, 2005 - btu. 

  4. Users are asked to identify the version of XSLT and XPath
     they are using for questions that are specific to one version

  5. Clarifying the policy on editing the list archive (we don't edit
     it). 

==============
March 30, 2004 - btu. 

  1. All references to subscribing and unsubscribing have been
     updated to reflect changes in the list management system.

  2. Pointers to the XSL and XPath specification were removed. There
     are now so many specifications and draft specifications relevant
     to XSL that it is more practical to simply point to W3C's XSL
     page. 

  3. A few typographical errors were corrected.

Current Thread