> Is Vcc (+5V) one of the controller pinouts (possibly pin 7), or do I have
> to set one of SWCHA's pins to 1 in output form to emulate Vcc?
I do belive this to be correct. The schematics I have show pin 7 as 5V
and pin 8 as ground. The 5V is used by the paddles as a pull up to charge
the capacitors. This line is wired to the voltage regulator, so you can
pull reasonable current if desired.
Mark
--
Archives (includes files) at http://www.biglist.com/lists/stella/archives/
Unsub & more at http://www.biglist.com/lists/stella/
