Subject: RE: [stella] J. Grand PCB help--I'm an idiot From: "Billy Eno" <ceno@xxxxxxxxxxxxx> Date: Tue, 9 Jul 2002 21:51:19 -0500 |
As a devoted user of Joe Grand's PCB's :> I suggest that you get a ZIF (Zero Insertion Force) socket for testing your EPROMS before soldering them to a PCB. You can get ZIF sockets most everywhere, Digi-key is a good place to start. Billy > -----Original Message----- > From: owner-stella@xxxxxxxxxxx [mailto:owner-stella@xxxxxxxxxxx]On > Behalf Of Joe Grand > Sent: Tuesday, July 09, 2002 9:15 PM > To: stella@xxxxxxxxxxx > Subject: Re: [stella] J. Grand PCB help--I'm an idiot > > > First of all, the components are aligned with pin 1 being the square pad, > though you probably knew that. The front of the board for the > components is > the side with the "Rev A<cr>J. Grand 2001". > > When you plug the board in, the chips should be facing away from you. If > you have trouble with alignment for some reason, stick it back in > the cart. > > Other things wrong might be cold solder joints or other incorrect > soldering > techniques causing loose or no connections (believe me, I've seen some > REALLY BAD soldering by homebrew people before :), improperly programmed > EPROM, bad logic gate, etc. There's really not much that can go wrong on > the board, considering how simple the design is.. > > Soon (I promise!) I'll have pictures and general assembly instructions on > my website.. > > Joe > jgrand@xxxxxxxxxxxxxx > > > At 12:54 PM 7/9/2002, you wrote: > >If I have the PCB facing me, with the narrow (cartridge slot) end at the > >bottom, and the side that says "Rev A<cr>J. Grand 2001" facing > me (and the > >writing therefore on the left side), then I should just drop a 2732 into > >the upper socket, with pin 1 at the upper right, and a 7404 into the > >lower socket, again with pin 1 at the upper right, correct? > > > >And then when I plug it into the Atari, the chips should be facing the > >ceiling. Is that correct? > > > >Because if so, it ain't working. Am I missing something really obvious? > > > >Adam > > > ------------------------------------------------------------------ > ---------------------------- > Archives (includes files) at http://www.biglist.com/lists/stella/archives/ > Unsub & more at http://www.biglist.com/lists/stella/ > ---------------------------------------------------------------------------------------------- Archives (includes files) at http://www.biglist.com/lists/stella/archives/ Unsub & more at http://www.biglist.com/lists/stella/
Current Thread |
---|
|
<- Previous | Index | Next -> |
---|---|---|
Re: [stella] J. Grand PCB help--I'm, Joe Grand | Thread | Re: [stella] ET is Pretty, Glenn Saunders |
Re: [stella] J. Grand PCB help--I'm, Joe Grand | Date | Re: vcs.h (was: Re: [stella] redlin, Thomas Jentzsch |
Month |