[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index] [Thread Index]
[Monthly Archives] [List Home]

[Virtools] noodlebox NOT shockwave3D

Oh I see... I checked noodlebox again.

If you are referring to the 3D-like menu effects on the frontpage of
noodlebox/bitsandpieces, with a sort of motion blur, it is NOT shockwave3D.

It's been on this website for about a year, well before shockwave3D shipped,
so that's why I was getting confused. It does look like real time 3D, which
may explain the confusion with shockwave3D. If you check the source of the
HTML page, you will see that it runs with Director 7.0.2.

It's worth seeing though, the guys at noodlebox are REALLY good!

François



-----Message d'origine-----
De : marc aragnou [mailto:amarc@ozemail.com.au]
Envoyé : mardi 12 juin 2001 00:09
À : dujardin@virtools.com; 'Virtools-User-Group (E-mail)'
Objet : RE: [Virtools] Virtools Promises and Completion


The URL below doesn't work? Damn I must be the only one seeing things ;) Try
this one http://www.noodlebox.com/bitsandpieces/main.htm

Otherwise browse their website from the root directory onwards. There's some
very "arty" stuff,  flying butterflies, etc...I especially love the flower
page. It generates procedural nodes and plants in layers. Very very kewl.

-----Original Message-----
From: owner-virtools-user-group@lists.theswapmeet.com
[mailto:owner-virtools-user-group@lists.theswapmeet.com]On Behalf Of
Francois Dujardin
Sent: Monday, 11 June 2001 10:56 PM
To: 'Virtools-User-Group (E-mail)'
Subject: RE: [Virtools] Virtools Promises and Completion


Hello Marc,

I've known noodlebox.com for a while and really love their work (as they've
always been a leader in innovative interfaces and projects), but I couldn't
spot the shockwave3D projects on their website.

Could you tell me where to look? It's certainly interesting to see what
highly skilled programmers like the noodlebox people can come up with with a
real-time 3D engine.

Thanks

François



-----Message d'origine-----
De : owner-virtools-user-group@lists.theswapmeet.com
[mailto:owner-virtools-user-group@lists.theswapmeet.com]De la part de
marc@multiweb.com.au
Envoyé : dimanche 10 juin 2001 01:05
À : 'Andreas Hartung'; 'Virtools-User-Group (E-mail)'
Cc : 'Kam Memarzia'
Objet : RE: [Virtools] Virtools Promises and Completion


Andreas, Try this link then http://www.noodlebox.com/bitsandpieces/
It does work for me. May be the server was down at the time you tried to
look at it.
It is a typical "Demo" but worth having a look at.
I understand your point and I'm not trying to say that Shockwave 3D and
Flash are the same thing. Merely showing the ease of use of Shockwave 3D and
its growing popularity. No doubt there are a lot of interesting things
happening around on the 3D scene.

-----Original Message-----
From: owner-virtools-user-group@lists.theswapmeet.com
[mailto:owner-virtools-user-group@lists.theswapmeet.com]On Behalf Of
Andreas Hartung
Sent: Saturday, 9 June 2001 5:34 PM
To: Virtools-User-Group (E-mail)
Cc: Kam Memarzia
Subject: Re: [Virtools] Virtools Promises and Competion



> Check out this link http://linkdup.com and go to the noodlebox web site if
> you get a chance. You'll need shockwave 3D. I think Macromedia will get
the
> edge in 3D products because they're good at customer support. Look how far
> they've got Flash. Shockwave 3D will do the same. I used to be a NeMo fan
> too.
>
I've searched for the noodlebox, but found only a dead link...

I would be cautious to make an equation in the way Flash = Shockwave 3D.
Cause, 3D space is at least one step deeper into complexity and Photoshop
may be the preparation platform before the work with Director starts, so Max
is the preparation platform before work with Dev starts (ok, thats also an
equation :).
I think that many webdesigner might get a bit disappointed about the heavier
workload when 3D space begins,
be it with Macromedia, Atmosphere or ... most of the Dev2 user knew _this_
before they bought Dev or Creation.

Andreas

...............................................................
Distributed via the virtools-user-group list:
http://www.theswapmeet.com/numl.html
To reply to the list instead of its author, use "Reply to All"
To unsubscribe: send "unsubscribe virtools-user-group" to
Majordomo@lists.theswapmeet.com
To subscribe: send "subscribe virtools-user-group" to
Majordomo@lists.theswapmeet.com
To post a message: send it to virtools-user-group@lists.theswapmeet.com
...............................................................

...............................................................
Distributed via the virtools-user-group list:
http://www.theswapmeet.com/numl.html
To reply to the list instead of its author, use "Reply to All"
To unsubscribe: send "unsubscribe virtools-user-group" to
Majordomo@lists.theswapmeet.com
To subscribe: send "subscribe virtools-user-group" to
Majordomo@lists.theswapmeet.com
To post a message: send it to virtools-user-group@lists.theswapmeet.com
...............................................................

...............................................................
Distributed via the virtools-user-group list:
http://www.theswapmeet.com/numl.html
To reply to the list instead of its author, use "Reply to All"
To unsubscribe: send "unsubscribe virtools-user-group" to
Majordomo@lists.theswapmeet.com
To subscribe: send "subscribe virtools-user-group" to
Majordomo@lists.theswapmeet.com
To post a message: send it to virtools-user-group@lists.theswapmeet.com
...............................................................


...............................................................
Distributed via the virtools-user-group list: http://www.theswapmeet.com/numl.html
To reply to the list instead of its author, use "Reply to All"
To unsubscribe: send "unsubscribe virtools-user-group" to Majordomo@lists.theswapmeet.com
To subscribe: send "subscribe virtools-user-group" to Majordomo@lists.theswapmeet.com
To post a message: send it to virtools-user-group@lists.theswapmeet.com
...............................................................
References: