[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index] [Thread Index]
[Monthly Archives] [List Home]

Re: [Virtools] Getting nuts with the bus

I suggest that you look at creating nodal paths for your bus and for your
camera.  They should be able to do what you want.

Hope this helps.

David Callele

----- Original Message -----
From: "Javier Cortell" <javirito@netexplora.com>
To: <virtools-user-group@lists.theswapmeet.com>
Sent: Monday, September 03, 2001 8:44 AM
Subject: [Virtools] Getting nuts with the bus


> Hi everyone
>
> I've got a little big trouble and I would like to know if someone could
> help me. I'll try to do my best, my english is poor. I've got a street,
> and a bus is coming; I need that the bus stop in its place, and the
> camera has to get into it and go inside it while it's running in the
> street. I need to know how determine every place that the bus has to
> stop -how write it in the schematic using building blocks or/and
> behavior graphs-, how the camera can go inside the bus when this runs.
> Of course the camera has to get down the bus when it stopped.
>
> Thank you very much. I will be eternally pleased to all of you if you
> can help me, I'm going crazy with this!! Thank you very much!!
> ...............................................................
> Distributed via the virtools-user-group list:
http://www.theswapmeet.com/numl.html
> To reply to the list instead of its author, use "Reply to All"
> To unsubscribe: send "unsubscribe virtools-user-group" to
Majordomo@lists.theswapmeet.com
> To subscribe: send "subscribe virtools-user-group" to
Majordomo@lists.theswapmeet.com
> To post a message: send it to virtools-user-group@lists.theswapmeet.com
> ...............................................................

...............................................................
Distributed via the virtools-user-group list: http://www.theswapmeet.com/numl.html
To reply to the list instead of its author, use "Reply to All"
To unsubscribe: send "unsubscribe virtools-user-group" to Majordomo@lists.theswapmeet.com
To subscribe: send "subscribe virtools-user-group" to Majordomo@lists.theswapmeet.com
To post a message: send it to virtools-user-group@lists.theswapmeet.com
...............................................................
Follow-Ups: References: