[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index] [Thread Index]
[Monthly Archives] [List Home]

RE: [Virtools] Touch Screen problem

Some touchscreens need to be calibrated again while changing screen
resolution ... So if you switch to fullscreen mode in Virtools, you'd
better configure your fullscreen mode like your desktop resolution
(resolution AND frequency).
Another suggestion : If Elo gx are like Microtouch systems, maybe you
should adjust the "click" setup in your drivers.
Hope this helps.
Arnaud.

____________________________________________
Arnaud MUTHELET               SIM TEAM / Virtools reseller
arnaud@simteam.com            http://www.simteam.com

11 Boulevard Brune - 75014 PARIS - FRANCE
tel: 33.(0)1.45.45.15.55
fax: 33.(0)1.45.45.16.17

____________________________________________
                  SIM TEAM
 un autre regard sur la realite virtuelle

____________________________________________

> -----Original Message-----
> From: owner-virtools-user-group@lists.theswapmeet.com 
> [mailto:owner-virtools-user-group@lists.theswapmeet.com] On 
> Behalf Of Sebastian Barrot
> Sent: mardi 28 mai 2002 17:46
> To: Virtools-User-Group (E-mail)
> Subject: [Virtools] Touch Screen problem
> 
> 
> 
> Hello everyone !!!
> 
> I need your help, I have an Elo graphics touch screen system 
> , and I don't know why, but the touch screen doesn't work 
> with Virtools ! under Win 98, but it works fine on all the 
> others  aplications.. I'll appreciate your help.
> 
> Thanks a lot !
> 
> Sebastian Barrot
> Tel.: 4778-9000 int. 115
> sebastianb@siasistemas.com.ar
> www.siasistemas.com.ar
> 
> 
> ...............................................................
> Distributed via the virtools-user-group list: 
> http://www.theswapmeet.com/numl.html
> To reply to the list 
> instead of its author, use "Reply to All" To unsubscribe: 
> send "unsubscribe virtools-user-group" to 
> Majordomo@lists.theswapmeet.com To subscribe: send "subscribe 
> virtools-user-group" to Majordomo@lists.theswapmeet.com To 
> post a message: send it to virtools-user-group@lists.theswapmeet.com
> ...............................................................
> 

...............................................................
Distributed via the virtools-user-group list: http://www.theswapmeet.com/numl.html
To reply to the list instead of its author, use "Reply to All"
To unsubscribe: send "unsubscribe virtools-user-group" to Majordomo@lists.theswapmeet.com
To subscribe: send "subscribe virtools-user-group" to Majordomo@lists.theswapmeet.com
To post a message: send it to virtools-user-group@lists.theswapmeet.com
...............................................................
References: