Re: [xsl] how to match node set with attribute then pass toatemplate

Subject: Re: [xsl] how to match node set with attribute then pass toatemplate
From: S Woodside <sbwoodside@xxxxxxxxx>
Date: Tue, 30 Sep 2003 03:14:54 -0400

On Monday, September 29, 2003, at 03:46 PM, Biying Huang wrote:


Professor Holman:

Thank you very much. It works perfectly for me.

By the way, I am new to XSLT, and not quite understand things like:

How about reading the spec? it's pretty clear (Xpath in this case)


<xsl:if test="count( preceding-sibling::Attachment[@showImage='true'] ) mod 2
= 0">

take All preceding siblings that are <Attachment> and then filter, only the ones that have the attribute showImage and it's equal to 'true'. Then count them. Then take the modulo 2 value (look up modulo arithmetic for this) and see it's = 0, which means the count divides evenly by 2.


and
<xsl:for-each
         select="following-sibling::Attachment[@showImage='true'][1]">

take All following siblings that are <Attachment> and then filter, only the ones that have the attribute showImage and it's equal to 'true'. , and then filter again, to leave only the first one. which will be the immediately following one.


the spec will tell you all this.

simon

.......

Which of your books should I read first?

Biying

"G. Ken Holman" wrote:

At 2003-09-26 15:52 -0400, Biying Huang wrote:
So I have to put <fo:table-row>.

A revision is below ... act on every second one and then address the one
following.


In my case, for each Attachment, how can I
output its <info> on top of its <filename>,

To put the info on top of its filename, put each in separate blocks.


I hope this helps.

.................. Ken

T:\Biying>type biying.xml
<AttachmentList>
     <Attachment showImage="true">
         <filename>Image5445.jpg</filename>
         <info>image information</info>
   </Attachment>

   <Attachment showImage="false">
         <filename>Image5446.jpg</filename>
         <info>image information</info>
   </Attachment>

   <Attachment showImage="true">
         <filename>Image5447.jpg</filename>
         <info>image information</info>
   </Attachment>
   <Attachment showImage="false">
         <filename>Image5448.jpg</filename>
         <info>image information</info>
   </Attachment>

   <Attachment showImage="true">
         <filename>Image5449.jpg</filename>
         <info>image information</info>
   </Attachment>
   <Attachment showImage="false">
         <filename>Image5450.jpg</filename>
         <info>image information</info>
   </Attachment>

   <Attachment showImage="true">
         <filename>Image5451.jpg</filename>
         <info>image information</info>
   </Attachment>

   <Attachment showImage="true">
         <filename>Image5452.jpg</filename>
         <info>image information</info>
   </Attachment>
   <Attachment showImage="false">
         <filename>Image5453.jpg</filename>
         <info>image information</info>
   </Attachment>

   <Attachment showImage="true">
         <filename>Image5454.jpg</filename>
         <info>image information</info>
   </Attachment>

</AttachmentList>

T:\Biying>type biying.xsl
<?xml version="1.0" encoding="iso-8859-1"?>
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform";
                 xmlns="http://www.w3.org/1999/XSL/Format";
                 version="1.0">

<xsl:output indent="yes"/>

<xsl:template match="/">
<root font-family="Times" font-size="20pt">

   <layout-master-set>
     <simple-page-master master-name="frame"
                         page-height="210mm" page-width="297mm"
                         margin-top="1cm" margin-bottom="1cm"
                         margin-left="1cm" margin-right="1cm">
       <region-body region-name="frame-body"/>
     </simple-page-master>
   </layout-master-set>

<page-sequence master-reference="frame">
<flow flow-name="frame-body">
<block>Test of table columns</block>
<table border="solid">
<table-body>
<xsl:apply-templates select="/AttachmentList/
Attachment[@showImage='true']"/>
</table-body>
</table>
</flow>
</page-sequence>
</root>
</xsl:template>


<xsl:template match="Attachment">
<xsl:if test="count( preceding-sibling::Attachment[@showImage='true'] )
mod 2 = 0">
<table-row>
<table-cell border="solid">
<block><xsl:value-of select="info"/></block>
<block><xsl:value-of select="filename"/></block>
</table-cell>
<xsl:for-each
select="following-sibling::Attachment[@showImage='true'][1]">
<table-cell border="solid">
<block><xsl:value-of select="info"/></block>
<block><xsl:value-of select="filename"/></block>
</table-cell>
</xsl:for-each>
</table-row>
</xsl:if>
</xsl:template>


</xsl:stylesheet>
T:\Biying>saxon -o biying.fo biying.xml biying.xsl

T:\Biying>type biying.fo
<?xml version="1.0" encoding="utf-8"?>
<root xmlns="http://www.w3.org/1999/XSL/Format"; font-family="Times"
font-size="20pt">
<layout-master-set>
<simple-page-master master-name="frame" page-height="210mm"
page-width="297mm" margin-top="1cm" margin-bottom="1cm" margin-left="1cm"
margin-right="1cm">
<region-body region-name="frame-body"/>
</simple-page-master>
</layout-master-set>
<page-sequence master-reference="frame">
<flow flow-name="frame-body">
<block>Test of table columns</block>
<table border="solid">
<table-body>
<table-row>
<table-cell border="solid">
<block>image information</block>
<block>Image5445.jpg</block>
</table-cell>
<table-cell border="solid">
<block>image information</block>
<block>Image5447.jpg</block>
</table-cell>
</table-row>
<table-row>
<table-cell border="solid">
<block>image information</block>
<block>Image5449.jpg</block>
</table-cell>
<table-cell border="solid">
<block>image information</block>
<block>Image5451.jpg</block>
</table-cell>
</table-row>
<table-row>
<table-cell border="solid">
<block>image information</block>
<block>Image5452.jpg</block>
</table-cell>
<table-cell border="solid">
<block>image information</block>
<block>Image5454.jpg</block>
</table-cell>
</table-row>
</table-body>
</table>
</flow>
</page-sequence>
</root>


--
Next public US delivery:        3-day XSLT/2-day XSL-FO 2003-10-13
Next public European delivery:  3-day XSLT/2-day XSL-FO 2003-11-??
Instructor-led on-site corporate, government & user group training
for XSLT and XSL-FO world-wide:  please contact us for the details

G. Ken Holman                 mailto:gkholman@xxxxxxxxxxxxxxxxxxxx
Crane Softwrights Ltd.          http://www.CraneSoftwrights.com/s/
Box 266, Kars, Ontario CANADA K0A-2E0    +1(613)489-0999 (F:-0995)
ISBN 0-13-065196-6                       Definitive XSLT and XPath
ISBN 0-13-140374-5                               Definitive XSL-FO
ISBN 1-894049-08-X   Practical Transformation Using XSLT and XPath
ISBN 1-894049-11-X               Practical Formatting Using XSL-FO
Member of the XML Guild of Practitioners:     http://XMLGuild.info
Male Breast Cancer Awareness  http://www.CraneSoftwrights.com/s/bc

XSL-List info and archive: http://www.mulberrytech.com/xsl/xsl-list


XSL-List info and archive: http://www.mulberrytech.com/xsl/xsl-list



-- www.simonwoodside.com :: www.openict.net :: www.semacode.org 99% Devil, 1% Angel


XSL-List info and archive: http://www.mulberrytech.com/xsl/xsl-list



Current Thread