For your first question be sure to select the appropriate vector of
direction in the building block "Position On Curve". This vector must be
the one that gives the direction of your object (generally it's Z but perhaps
it's another one in your case).
Now to set by default the delay links equals to 0, click with the right
mouse button in the "Show/Hide Delay Link" button that you can find in
the Schematic Window.
See You
Ouali
Padraig Finnerty wrote:
hi, I have another question or two if you don't mind :-) I have an object following a path, I'm using the 'position on curve'behaviour block. I have the 'follow' parameter checked and 1,0,0as the follow axis (which should be forward for the object), but itseems as if it's using the Y-axis to follow the path, as the top ofthe object (and the green axis) points in the direction of the curve.Can anyone give me a suggestion as to what the problem mightbe? I have tried all axes and I get the right direction on one (0,-1,0),but this rotates the object 90 degrees anti-clockwise. A second question. Most of my links have a delay of zero.Is there a way to set the default link delay to be zero insteadof one? Thanks. Padraig