[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index] [Thread Index]
[Monthly Archives] [List Home]

[Virtools] object slider

hi
I have an house
a nice big house, with solid wall and some doors
 
i declered the house as an obstacle and i added a object slider
the house is constituted of wall with holes ( where i put the doors that now are not declered like obstacle jet)
 
so...the problem is that according to the parameter that i use as radious I can or not pass trought the holes.
and to be able to pass the little doors i have to set the radious to 0.1
and here the problems
 
1)with this radius i can pass trought the wall as well (ok i can use a workaround to decect proximity or contact etc etc)
 
2)with higer values 0.2 i can pass the big main door BUT JUST ON ONE SIDE so once entered i can't go out !!
so why the behaviour is different  from out to in and from in to out
 
ciao
Nico
 
 
 
 

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Pallamin Nico
GRIC-IRIT
118, Route de Narbonne
31062 Toulouse – France
Fax 05 61 55 77 09
Sms 06 99 49 57 00
http://www.irit.fr/GRIC/personnel/pallamin

 
Follow-Ups: References: